重量（凈重)	88.5kg

SQP43-50-25VQ-86DC-18 東京計器TOKYOKEIKI雙聯定量葉片油泵SQP43-50-25VQ-86dc-18

型號規格

1 適用的液壓油

無記號：石油類液壓油

Ｆ３：磷酸酯類液壓油

Ｆ１１：水?乙二醇類液壓油

2 低噪音?定量雙聯葉片泵

SQP(S)21 系列

SQP(S)31，32 系列

SQP(S)41，42，43 系列

3 聯（軸側）液壓泵排量記號

系列	排量記號
SQP(S)2*	10, 12, 14, 15, 17, 19, 21
SQP(S)3*	17, 21, 25, 30, 32, 35, 38
SQP(S)4*	30, 35, 38, 42, 50, 60

4 第二聯（泵蓋側）液壓泵排量記號

系列	排量記號
SQP(S)*1	2, 3, 4, 5, 6, 7, 8, 9, 11, 12, 14
SQP(S)*2	10, 12, 14, 15, 17, 19, 21
SQP(S)*3	17, 21, 25, 30, 32, 35, 38

5 軸端形狀

86：方鍵平行軸

6 聯（軸側）泵排油口位置（由泵蓋側看）

A: 吸油口的相反側

B: 由吸油口逆時針旋轉 90°

C: 與吸油口在同一線上

D: 由吸油口順時針旋轉 90°

7 第二聯（泵蓋側）泵排油口位置（由泵蓋側看）

A: 由吸油口逆時針旋轉 135°（吸油口的相反側）

B: 由吸油口逆時針旋轉 45°（90°）

C: 由吸油口順時針旋轉 45°（與吸油口在同一線上）

D: 由吸油口順時針旋轉 135°（90°）

（注）?（?。﹥?nèi)角度是ＳＱＰ（Ｓ）43 系列。

8 液壓泵安裝方式

無記號：法蘭安裝型

2 ＊：腳架安裝型

腳架安裝面與聯泵排油口相對位置（參考下圖）

腳架安裝記號	以腳架安裝面為基準由軸側看到的聯泵排口的位置
2	上（12點方向）
23	右（3點方向）
26	下（6點方向）
29	左（9點方向）

9 旋轉方向（由軸側看）

無記號：右旋轉（順時針）

LH：左旋轉（逆時針）

10 設計編號：18

SQP43-50-25VQ-86DC-18 東京計器TOKYOKEIKI雙聯定量葉片油泵SQP43-50-25VQ-86dc-18

東京計器油泵TOKYOKEIKI葉片泵特點：

1，本系列是專為低噪音工況而開發的高壓性能子母葉片泵。

2，使用于注塑機械、橡膠機械、壓鑄機械、機床等各種液壓系統中。

3，增加了脈動衰減結構的設計，極大降低了壓力的脈動，使噪音更低，音原則質更流暢。

4，使用加厚的外殼設計，增加了泵的強度和抗震性，同時消音性能更*。

東京機器油泵適用范圍：本產品主要用于船舶，注塑機械，橡膠機械，油壓機械，壓鑄機械，塑料機械，打包機械，工程機械，機床機械，礦山機械，熱壓機械，制鞋機械，陶瓷機械，制磚機械，發泡機械，鍛造機械，流化機械，拉伸機械，等機械液壓配件。

東京計器葉片泵的安裝，

1油泵的支架座結構要牢固，剛性好，并能充分吸收振動，

2油泵可安裝成任何方向，泵和電機軸必須對正，同軸度應控制在0.1mm以內，

3，吸入阻力不應太高，以防產生空蝕現象。

4，注意進油口處連接法蘭，接頭以及整個吸油管道必須密封，防止漏氣。

SQP43-50-25VQ-86DC-18 東京計器TOKYOKEIKI雙聯定量葉片油泵SQP43-50-25VQ-86dc-18

SQP43-50-25VQ-86DC-18 TOKYO KEIKI Double Fixed Displacement Vane Pump

Model Specification Definition

1 Applicable Hydraulic Oil

No marking: Petroleum-based hydraulic oil

F3: Phosphate ester hydraulic oil

F11: Water-glycol hydraulic oil

2 Low-Noise Fixed Displacement Double Vane Pump Series

SQP(S)21 Series

SQP(S)31, 32 Series

SQP(S)41, 42, 43 Series

3 Displacement Code for Primary Pump (Shaft Side)

Series	Displacement Codes
SQP(S)2*	10, 12, 14, 15, 17, 19, 21
SQP(S)3*	17, 21, 25, 30, 32, 35, 38
SQP(S)4*	30, 35, 38, 42, 50, 60

4 Displacement Code for Secondary Pump (Cover Side)

Series	Displacement Codes
SQP(S)*1	2, 3, 4, 5, 6, 7, 8, 9, 11, 12, 14
SQP(S)*2	10, 12, 14, 15, 17, 19, 21
SQP(S)*3	17, 21, 25, 30, 32, 35, 38

5 Shaft End Configuration

86: Parallel shaft with square key

6 Outlet Port Position of Primary Pump (Viewed from Pump Cover Side)

A: Opposite to inlet port

B: 90° counterclockwise from inlet port

C: Collinear with inlet port

D: 90° clockwise from inlet port

7 Outlet Port Position of Secondary Pump (Viewed from Pump Cover Side)

A: 135° counterclockwise from inlet port (opposite side of inlet)

B: 45° counterclockwise from inlet port (90° for SQP(S)43 series)

C: 45° clockwise from inlet port (collinear with inlet for SQP(S)43 series)

D: 135° clockwise from inlet port (90° for SQP(S)43 series)

Note: Angles in parentheses apply to SQP(S)43 series.

8 Pump Mounting Type

No marking: Flange-mounted type

2*: Foot-mounted type

Relative position between foot mounting surface and primary pump outlet port (refer to attached drawing)

Foot Mount Code	Position of Primary Pump Outlet (Viewed from Shaft Side, referenced to foot mounting surface)
2	Top (12 o’clock position)
23	Right (3 o’clock position)
26	Bottom (6 o’clock position)
29	Left (9 o’clock position)

9 Rotation Direction (Viewed from Shaft Side)

No marking: Right rotation (clockwise)

LH: Left rotation (counterclockwise)

10 Design No.: 18

SQP43-50-25VQ-86DC-18 TOKYO KEIKI Double Fixed Displacement Vane Pump

Features of TOKYO KEIKI Vane Pumps

This series is a high-performance cartridge vane pump specially developed for low-noise operating conditions.
Widely applied to hydraulic systems of injection molding machines, rubber machinery, die-casting machines, machine tools and other equipment.
Equipped with pressure pulsation damping structure design, which greatly reduces pressure pulsation, delivers lower noise and smoother operation.
Adopts thickened housing design to improve structural strength and vibration resistance, with superior noise reduction performance.

Application Scope

This pump serves as a hydraulic component for marine equipment, injection molding machines, rubber machinery, hydraulic machinery, die-casting machines, plastic machinery, balers, construction machinery, machine tools, mining machinery, hot pressing equipment, shoe-making machinery, ceramic machinery, brick-making machinery, foaming equipment, forging machinery, fluidized bed equipment, stretching machinery and other industrial equipment.

Installation Guidelines for TOKYO KEIKI Vane Pumps

The pump support base shall be sturdy and rigid to absorb vibration sufficiently.
The pump can be mounted in any orientation; the pump shaft and motor shaft must be aligned with coaxial tolerance within 0.1 mm.
Avoid excessive suction resistance to prevent cavitation.
Ensure all flanges, fittings and the entire suction pipeline at the inlet are fully sealed to prevent air leakage.

SQP43-50-25VQ-86DC-18 TOKYO KEIKI Double Fixed Displacement Vane Pump

中文字幕少妇熟女,成人av一区二区在线,日本不卡在线视频播放,久久狠色av噜噜系列,老熟女六十路丰满,久久久久九九久久久久久久999,欧美亚洲另类在线日韩,亚洲日本高清一二三区,久久99人妻一区

雙聯定量葉片油泵SQP43-50-25VQ-86dc-18 返回列表頁

SQP43-50-25VQ-86DC-18 TOKYO KEIKI Double Fixed Displacement Vane Pump